myFirst_Camera_Insta_2_Blue_4

myFirst Camera Insta 2

Blue
$139.00 SGD
Skip to product information
myFirst_Camera_Insta_2_Blue_4

myFirst Camera Insta 2

$139.00 SGD
Color

Frequently Purchased Together

Product Specifications
Design & Build
  • Dimensions: 132.7x95.8x45.5mm / 5.2 x 3.8 x 1.8 inches
  • Weight: 232g / 8.2oz / 0.51 lbs
Display
  • Screen Size: 2.4"
  • Screen Type: Full HD IPS
  • Screen Resolution: 320x240
Media & Capture
  • Photo Resolution (MAX): 4032x2880 (12MP)
  • Video Resolution: 1920x1080 / 30fps
  • Image Format: JPEG
  • Video Format: AVI
Power & Battery
  • Battery Type: Polymer Lithium Battery
  • Battery Capacity: 700mA, 7.4V
  • Battery Life: 5 hours
  • Charging Time: About 2.5 hours
  • Charging Power: DC-5V/1.5A
  • Min/Max charging power (watts): 2.25W-4.5W
  • USB Power Delivery (USB PD): Not supported
Storage & Connectivity
  • Interface Type: Type C
  • Storage Support: Memory Card (TF Card)
  • Storage: TF Card up to 32GB
What's in the Box
  • myFirst Camera Insta 2
  • High Quality Thermal Paper x 2 rolls
  • Thermal Sticker Paper x 1 roll
  • Charging Cable
  • Neck lanyard
  • Quick Start Guide
Warranty

This product is covered by 12 months manufacturer's warranty. Terms & conditions apply.

Shipping

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

Important Safety & Product Information
⚠️ WARNING

Failure to read and follow these safety instructions could result in fire, electric shock, serious injury, medical events, death, or damage to the device or other property.

Parent or Legal Guardian Responsibility
  • Adult Setup Required: This device must be set up, configured, and synchronized by a parent or legal guardian before allowing a child to use it.
  • Supervision & Safety: It is the sole responsibility of the parent or legal guardian to read and understand this document, educate the child on proper usage, and ensure the device is used in a safe, appropriate, and lawful manner.
Choking & Strangulation Hazard
  • Small Parts: This product contains small parts that pose a choking hazard.
  • Age Restriction: This device and its accessories are strictly not for children under 3 years old.
  • Cords and Bands: Ensure charging cables and wristbands are kept out of reach of infants to avoid strangulation hazards.
Health & Medical Disclaimer
  • Recreational Use Only: The device, its software, accessories, and any related data are intended exclusively for recreational and informational purposes. They are not medical devices and are not intended to diagnose, treat, cure, monitor, or prevent any disease, medical condition, or symptom.
  • Accuracy of Data: Activity tracking and sensor metrics rely on algorithms and hardware that provide a close estimation of activity. They are not precision-grade and should not be relied upon for critical tracking or medical assessment.
Battery Warnings

This device contains an internal, non-user-replaceable lithium-ion battery. Failure to follow these guidelines may shorten battery lifespan or present a risk of fire, chemical burns, electrolyte leaks, property damage, and severe injury.

  • Do Not Alter: Do not disassemble, modify, remanufacture, puncture, or mechanically damage the device or battery.
  • Do Not Force Open: Do not attempt to remove or force open the non-user-replaceable battery.
  • Extreme Heat Exposure: Do not expose the device or battery to fire, explosions, open flames, or other high-heat sources.
  • Charging Safety: Only use power cables, data cables, and power adapters approved or supplied by myFirst. Using unapproved third-party charging accessories poses a severe risk of short-circuiting, overheating, and fire.
  • Thermal Escalation: If the device or charging cable continually heats up or feels unusually hot to the touch, remove it from the wrist or disconnect it from the power source immediately and contact customer service promptly.
Ambient Operating & Storage Conditions
  • Vehicle Heat Traps: Do not leave the device exposed to intense heat sources or in high-temperature locations, such as inside an unattended vehicle parked in direct sunlight. To prevent permanent damage or battery failure, remove the device from the vehicle or store it out of direct sunlight (e.g., in the glove compartment).
  • Temperature Thresholds: Do not operate or store the device outside of the specific temperature ranges defined in the printed user manual.
⚠️ CAUTION

Failure to observe these cautions could result in minor or moderate personal injury, skin reactions, or property damage.

Skin Irritation & Hygiene
  • Sensitive Skin: Prolonged and continuous contact with wearable bands may cause skin irritation, redness, or allergies in some users, particularly if the user has sensitive skin, eczema, or sweat buildup.
  • Preventative Care: If skin irritation, rash, or discomfort occurs, remove the device immediately and allow the skin time to heal.
  • Fit & Cleanliness: To prevent irritation, keep both the user’s wrist and the device band clean and dry. Do not over-tighten the band on the wrist; adjust the fit to allow sufficient airflow between the band and the skin.
💡 NOTICE

Failure to observe these notices could result in property damage, data loss, or permanently compromise the functionality and longevity of the device.

Water Resistance Limitations
  • Ingress Protection Guidelines: This device is engineered to be resistant to sweat, water splashes, and rain, and can withstand brief accidental submersion in fresh water up to a depth of 1 meter for a limited duration.
  • Prohibited Activities: The device is not suitable and should not be worn for swimming, diving, showering, bathing, or high-velocity water activities (e.g., water skiing).
  • Degradation Over Time: Water resistance is not permanent. It is based on the factory condition of the device and may decrease over time due to natural wear and tear, drops, or exposure to soaps, detergents, and chemicals. Avoid exposing the device to pressurized or high-velocity water.
Proper Disposal & Compliance

Environmental Regulations: Do not dispose of this device or its lithium-ion battery in standard household waste. Contact your local waste disposal department or electronic recycling facility to dispose of the device and battery in accordance with applicable local laws and environmental regulations.

Experience the magic of instant printouts in just 10 seconds with our 12 Megapixel myFirst Camera Insta 2, specially designed for 3 - 12-year-old kids. The Camera Insta 2 comes with top-notch thermal printing paper, ensuring high-quality prints. With support for microSD cards up to 32GB, your young explorer can capture endless memories. Its lightweight design, complete with a lanyard and an extra selfie lens, ensures that your child will enjoy taking photos from sun-up till sun-down.

Young girl holding a pink toy camera in an outdoor setting

Your Kid's Favourite Instant Print Camera

Unlimited Printing

You only need to use thermal paper and get snapping! Using thermal printing technology, you won’t ever have to worry about refilling ink, ever! Each roll is capable of printing up to 60 sheets. We’re also giving 2 rolls of thermal paper & 1 sticker thermal roll(36 shots) to go with your camera Insta 2.

myFirst_Camera_Insta_2_Pink

Sharp Images with Pre-loaded Frames​

Our camera captures high-quality photos, ranging from 3M to 12M, and records 1920×1080 videos, saved onto a microSD card (not included). At myFirst, we prioritize providing your child with top-notch experiences, offering custom frames to enhance their pictures, ensuring endless excitement.

Lightweight and Long-Lasting​

Weighing a tiny 232g, your child will never get tired of using our instant print camera for kids. We’ve also provided a lanyard too with a battery capacity of 1500mAh and only 2hours charging from flat, your child will be taking photos from sun-up till sun-down. Perfect for a day out at the zoo or a holiday trip.

Sticker Fun!​

Double the fun with our sticker thermal paper! With a sticky back, you can now paste your pictures anywhere. You could make things memorable with these sticker thermal papers. Plus the little ones can colour the pictures, making it a fun family activity!

Built-In Rechargeable Battery

With a battery capacity of 1500 mAh, use the camera without the urge of power consumption.

See what myFirst families are saying

Frequently asked questions

What age group is the myFirst Camera Insta 2 suitable for?

The Insta 2 is designed for young users aged 5-12, making it perfect for capturing creative moments during their childhood.

Does the camera require ink for printing photos?

The camera uses thermal printing technology, which means it never requires ink refills. It prints photos directly onto thermal paper in just 10 seconds. Each roll of thermal paper can print up to 60 sheets, and the camera even supports sticker thermal paper, allowing your child to peel and stick their photos anywhere.

Does the camera save digital copies of the photos?

Yes! While the camera offers fun instant printing, it also saves digital versions of your photos and videos to a microSD card (sold separately, supporting up to 32GB). This allows you to store high-resolution files on your computer and print as many copies as you like later.

How long does the battery last, and how long does it take to charge?

We have equipped the camera with a 1500mAh rechargeable battery, designed to provide power from sun-up till sun-down. When it’s time to recharge, it takes approximately 2.5 hours to go from a flat battery to a full charge.

Thermal Papers & Stickers for myFirst Camera Insta 2

Related Products